Paper
2 May 1997 Numerical modeling on pulse discharge for a high-power fast-axial-flow CO2 laser
Author Affiliations +
Abstract
The numerical modeling on pulse discharge for a high power carbon-dioxide laser was developed to describe and predict laser operating characteristics. The influence of turbulence and convection on the output of a high power fast axial flow carbon-dioxide laser is especially considered in this paper. An obvious requirement is that the pulse has a precisely specified time shape in order to obtain well-controlled optical pulse. The active medium is described by assuming a five-temperature model and balancing the quantum densities of vibrational states of the CO2 and N2 molecules. The conclusions are very helpful to realize pulse operation in cw carbon-dioxide lasers, especially in the laser equipment which is applied to drilling, welding and cutting.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiaoyuan Peng, Shimin Li, and Lei Xu "Numerical modeling on pulse discharge for a high-power fast-axial-flow CO2 laser", Proc. SPIE 2989, Modeling and Simulation of Higher-Power Laser Systems IV, (2 May 1997); https://doi.org/10.1117/12.273675
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Carbon dioxide lasers

Pulsed laser operation

High power lasers

Convection

Numerical modeling

Laser cutting

Laser development

RELATED CONTENT

Latest advances in high power disk lasers
Proceedings of SPIE (February 17 2010)
High-power disk lasers: advances and applications
Proceedings of SPIE (February 15 2012)
High-power lasers for industrial and ecological use
Proceedings of SPIE (December 22 1998)
High-power YAG laser and its applications
Proceedings of SPIE (February 07 2000)
Laser In Materials Processing Report On Five Years...
Proceedings of SPIE (March 27 1985)
High speed keyhole welding of steels using <500 W CO2...
Proceedings of SPIE (October 08 2004)

Back to Top