Paper
27 December 1996 Geometrical optics approximation modeling of laser measurements of an operating Bessemer-converter casing
Mihail Mihalev, Orlin Parvanov, Peter S. Pirgov
Author Affiliations +
Proceedings Volume 3052, Ninth International School on Quantum Electronics: Lasers--Physics and Applications; (1996) https://doi.org/10.1117/12.262960
Event: Ninth International School on Quantum Electronics: Lasers: Physics and Applications, 1996, Varna, Bulgaria
Abstract
We report the use of computer techniques for modeling and visualization of the laser monitoring of the inner surface of an operating Bessemer converter. The purpose of the study was to estimate the accuracy of the laser measurement technique, to determine the geometrical parameters necessary, and to establish the requirements to the accuracy of the scanning part of a laser meter when the pulse duration, beam divergence and defects size are pre-set. The following basic conclusions can be drawn: firstly, it is possible to use a laser meter as a device for monitoring the casing thickness based on the use of a pulsed solid-state laser; secondly, the process of non-uniform wear can be handled by means of additional measurements with off-axis sounding geometry; thirdly, the numerical experiment demonstrates that, based on the accuracy achieved of determining the casing thickness, the operating life-time of the converter can be extended.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mihail Mihalev, Orlin Parvanov, and Peter S. Pirgov "Geometrical optics approximation modeling of laser measurements of an operating Bessemer-converter casing", Proc. SPIE 3052, Ninth International School on Quantum Electronics: Lasers--Physics and Applications, (27 December 1996); https://doi.org/10.1117/12.262960
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cladding

Pulsed laser operation

Data modeling

Geometrical optics

Thermal modeling

Visual process modeling

Process modeling

Back to Top