Paper
17 April 1998 Minimum-stage 4x4 electro-optic polymer switch
Author Affiliations +
Abstract
Throughout the paper, the concept of the planar 1-D lay-out (one layer) of kXk-switches and the concept of its compact double-layer/multi-layer counterpart will be presented and experimental results analysed for k equals 4. The paper presents the construction and treats of the working principles of switching system that can operate with minimum number of stages. A reduction of the number of stages is obtained due to combination of the electro-optic (EO) polymer films on the isotropic substrate. The optical switches are collected in one optical layer and each layer composes of at most two 2X2- switches simultaneously active. Poly (methyl methacrylate) (PMMA) film doped with azo dye and para-nitro- aniline/polyvinyl alcohol (p-N-An/PVA) were used for the EO films preparation. Thereby switching is applied horizontally (use one layer only) and vertically (between the two layers). The scheme of such a 4X4-switch in double-layer technique has been presented.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Igor G. Voitenko and Josef Giglmayr "Minimum-stage 4x4 electro-optic polymer switch", Proc. SPIE 3281, Polymer Photonic Devices, (17 April 1998); https://doi.org/10.1117/12.305410
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Switches

Switching

Waveguides

Refractive index

Electrodes

Polymers

Electro optic polymers

RELATED CONTENT

Electro-optic polymers for optical interconnects
Proceedings of SPIE (July 01 1990)
Silicon-based digital optical switch with slot structure
Proceedings of SPIE (November 24 2009)
Polymeric optical waveguides for device applications
Proceedings of SPIE (December 01 1991)
Photonic polymers in passive and active waveguide devices
Proceedings of SPIE (February 25 1993)

Back to Top