Paper
24 July 1998 Computational modeling and parametric study of a rotary actuator driven by piezoelectric composites
Hing Leung Li, ShiWei Ricky Lee
Author Affiliations +
Abstract
An innovative actuation principle was introduced in a previous study to drive a rotary actuator by piezoelectric composite laminate. The driving element is a three layer laminated beam with piezoceramics sandwiched between two antisymmetric composite laminae. By taking advantage of the structural coupling, a rotary actuator similar to ultrasonic motors can be implemented. A prototype of the mentioned actuator has been fabricated. The objective of this study is to model this device by finite element method. A commercial finite element code, ANSYS, was employed to simulate the rotary actuator. The piezoelectric laminate and the rotor were modeled by solid brick elements and special constraint element was used to account for the contact between two separate bodies. Static and transient dynamic analyses were conducted to simulate the deformation and the angular motion of the rotary actuator, respectively. Parametric study was performed by modal and harmonic analyses to investigate the dynamic response of the driving laminate. The results of this study confirmed the proposed actuation principle and the developed computational model may be used for the optimization of future design.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hing Leung Li and ShiWei Ricky Lee "Computational modeling and parametric study of a rotary actuator driven by piezoelectric composites", Proc. SPIE 3323, Smart Structures and Materials 1998: Mathematics and Control in Smart Structures, (24 July 1998); https://doi.org/10.1117/12.316321
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Composites

Motion models

Ultrasonics

Optimization (mathematics)

Prototyping

Smart materials

Back to Top