Paper
19 August 1998 New sizing method for liquidborne particles with high dynamic range
Aladar Czitrovszky, Attila Nagy, Tamas Mosoni, Peter Jani, Karoly Bodnar, Arpad Illes
Author Affiliations +
Proceedings Volume 3573, OPTIKA '98: 5th Congress on Modern Optics; (1998) https://doi.org/10.1117/12.321017
Event: OPTIKA '98: Fifth Congress on Modern Optics, 1998, Budapest, Hungary
Abstract
A new liquid-borne particle counters is described that utilizes an optimized optical set-up to determine the size distribution and concentration by two different methods and to estimate the shape-factor of the suspended particles. The aim of this optimization was to achieve the appropriate optical conditions for such type of measurement, viz. determining the geometry of the illumination and detection, and calculating the testing volume and dependence of the parameters of detected signal on the particle size for pulse height and pulse duration methods performed at the same illumination and detection conditions. The main benefit of the developed device is the high dynamic range of the size determination of the micron-size liquid-borne particles and the possibility of estimating their shape-factor. The proposed measurement method was incorporated in a PC- controlled LQB-1-200-L-T liquid-borne laser particle counter developed on the basis of previous APC-03-2 and APC-03-2A air-borne particle counters and a LQB-1-200 liquid-borne particle counter.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Aladar Czitrovszky, Attila Nagy, Tamas Mosoni, Peter Jani, Karoly Bodnar, and Arpad Illes "New sizing method for liquidborne particles with high dynamic range", Proc. SPIE 3573, OPTIKA '98: 5th Congress on Modern Optics, (19 August 1998); https://doi.org/10.1117/12.321017
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Particles

Signal detection

Liquids

High dynamic range imaging

Calibration

Laser development

Sensors

Back to Top