Paper
28 December 1998 Vehicle capture system
Kenneth L. Tacke
Author Affiliations +
Proceedings Volume 3575, Enforcement and Security Technologies; (1998) https://doi.org/10.1117/12.334983
Event: Enabling Technologies for Law Enforcement and Security, 1998, Boston, MA, United States
Abstract
Primex Aerospace Company, under contract with the U.S. Army Armament Research Development & Engineering Center (ARDEC), has developed a portable vehicle capture system for use at vehicle checkpoints. Currently when a vehicle does not stop at a checkpoint, there are three possible reactions: let the vehicle go unchallenged, pursue the vehicle or stop the vehicle with lethal force. This system provides a non-lethal alternative that will stop and contain the vehicle. The system is completely portable with the heaviest component weighing less than 120 pounds. It can be installed with no external electrical power or permanent anchors required. In its standby mode, the system does not impede normal traffic, but on command erects a barrier in less than 1.5 seconds. System tests have been conducted using 5,100 and 8.400 pound vehicles, traveling at speeds up to 45 mph. The system is designed to minimize vehicle damage and occupant injury, typically resulting in deceleration forces of less than 2.5 gs on the vehicle. According to the drivers involved in tests at 45 mph, the stopping forces feel similar to a panic stop with the vehicle brakes locked. The system is completely reusable and be rapidly reset.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kenneth L. Tacke "Vehicle capture system", Proc. SPIE 3575, Enforcement and Security Technologies, (28 December 1998); https://doi.org/10.1117/12.334983
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Resistance

Aerospace engineering

Roads

Injuries

Defense and security

Photography

Absorption

Back to Top