Accurate and efficient calibration method for a selenium flat-panel-detector-based volume tomographic angiography imaging system

Dinghua Zhang; Ruola Ning; Biao Chen; David L. Conover

doi:10.1117/12.349541

28 May 1999 Accurate and efficient calibration method for a selenium flat-panel-detector-based volume tomographic angiography imaging system

Dinghua Zhang, Ruola Ning, Biao Chen, David L. Conover

Author Affiliations +

Proceedings Volume 3659, Medical Imaging 1999: Physics of Medical Imaging; (1999) https://doi.org/10.1117/12.349541
Event: Medical Imaging '99, 1999, San Diego, CA, United States

Abstract

The flat panel detector (FPD) has become a highly promising candidate for a wide variety of applications. A prototype selenium thin film transistor (STFT) array-based volume tomographic angiography (VTA) imaging system has been constructed for the feasibility study. This experimental set- up uses a 14' X 17' STFT detector with a 2560 X 3072 array of 14 bit pixels. While an STFT detector offers high resolution digital images, there will always be some defects on the detector. These defects will result in severe streaks and ring artifacts, which have been found in reconstructed images of preliminary phantom studies. It is obvious that the stationary noise sources of the FPD are enhanced by the reconstruction procedure. In this paper, an accurate and efficient FPD calibration method for the VTA imaging system is proposed to reduce the artifacts. An improved gain map and a bad pixel detection method with an adaptive threshold are introduced based on statistical models of the FPD. A more efficient localized and sensitive bad pixel detection ability is obtained by sub-dividing the detector array into sub- arrays, classifying bad pixels as different regional patterns, and then optimizing an interpolation scheme for each pattern. The real-time background correction, gain correction, bad- pixel correction, and methods to generate calibration maps are described in detail. The calibration technique is examined through phantom studies and evaluated by comparing the artifacts and noise in reconstructed images. Improvement of image quality is obtained utilizing the calibration technique. It has been clearly verified that the streaks and ring artifacts in reconstructed VTA images are significantly reduced. Finally, the advantages of our method and future works are also discussed.

Citation Download Citation

Dinghua Zhang, Ruola Ning, Biao Chen, and David L. Conover "Accurate and efficient calibration method for a selenium flat-panel-detector-based volume tomographic angiography imaging system", Proc. SPIE 3659, Medical Imaging 1999: Physics of Medical Imaging, (28 May 1999); https://doi.org/10.1117/12.349541

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE