Design and fabrication of Smart Wing wind tunnel model and SMA control surfaces

Christopher A. Martin; Jonathan D. Bartley-Cho; John S. Flanagan; Bernie F. Carpenter

doi:10.1117/12.351562

9 July 1999 Design and fabrication of Smart Wing wind tunnel model and SMA control surfaces

Christopher A. Martin, Jonathan D. Bartley-Cho, John S. Flanagan, Bernie F. Carpenter

Proceedings Volume 3674, Smart Structures and Materials 1999: Industrial and Commercial Applications of Smart Structures Technologies; (1999) https://doi.org/10.1117/12.351562
Event: 1999 Symposium on Smart Structures and Materials, 1999, Newport Beach, CA, United States

Abstract

To verify the predicted benefits of the smart wing concept, two 16 percent scale wind tunnel models, one conventional and the other incorporating smart wing design features, were designed, fabricated and twice tested at NASA Langley's 16 ft Transonic Dynamic Tunnel, in two series of tests, conducted in May 1996 and June 1998, respectively. A key objective of the Smart Wing Phase 1 program was not only to construct wind tunnel models that could be used to validate the predicted benefits of using smart materials, but also to identify and reduce the risks involved in eventually integrating smart materials into an actual flight vehicle. Among the challenges encountered in developing the wind tunnel model were the attachment of the shape memory alloy (SMA) control surfaces to the wing box, integration of the SMA torque tube in the wing structure, installation of the instrumentation, and development of fail safe control mechanisms to protect the model and the tunnel in the event of failure of the smart systems. In this paper, design and fabrication details of the two Smart Wing Phase 1 wind tunnel models are presented. Among the topics covered are 1) model design requirements, model design and static testing; 2) manufacturing techniques with particular emphasis on the improvement in the design and fabrication of the SMA control surfaces from the first to the second test; 3) system integration; and 4) post-test analysis and planned improvement. Lessons learned from the Phase 1 effort are discussed along with plans for the Smart Wing Phase 2 program.

Citation Download Citation

Christopher A. Martin, Jonathan D. Bartley-Cho, John S. Flanagan, and Bernie F. Carpenter "Design and fabrication of Smart Wing wind tunnel model and SMA control surfaces", Proc. SPIE 3674, Smart Structures and Materials 1999: Industrial and Commercial Applications of Smart Structures Technologies, (9 July 1999); https://doi.org/10.1117/12.351562

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available