Bending response of polymer electrolyte actuator

Kazuo Onishi; Shingo Sewa; Kinji Asaka; Naoko Fujiwara; Keisuke Oguro

doi:10.1117/12.387770

7 June 2000 Bending response of polymer electrolyte actuator

Kazuo Onishi, Shingo Sewa, Kinji Asaka, Naoko Fujiwara, Keisuke Oguro

Proceedings Volume 3987, Smart Structures and Materials 2000: Electroactive Polymer Actuators and Devices (EAPAD); (2000) https://doi.org/10.1117/12.387770
Event: SPIE's 7th Annual International Symposium on Smart Structures and Materials, 2000, Newport Beach, CA, United States

Abstract

To induce bending motion in a perfluorinated polymer electrolyte by electric stimuli in water or saline solution, plating with metal is required. To fabricate electrodes, a perfluorocarboxylic acid membrane was soaked in Au(III) di- chloro phenanthroline complex solution, and then any adsorbed Au(III) cation complex was reduced in aqueous sodium sulfite. Optimizing the motion response depends on control of the chemical plating procedure. By sequential adsorption/reduction cycling, a suitable pair of gold electrodes with a fractal-like structure have been grown. We illustrate the advantage of optimizing the interfacial area between electrode and membrane to enhance deformation response. To achieve this, gold deposits in the film are accumulated by sequential adsorption/reduction plating cycles. Actuator displacement increased with the number of plating gold deposition cycles up to roughly 6 times, but showed no clear improvement beyond. It is believed that with excessive plating, the interfacial area begins to decrease and/or the hardness of the electrode increases, thus countering any improvement in electrical conductance. Displacement rates were proportional to current. This high interfacial area between the electrodes and polymer electrolyte leads to larger deformation. The measured deformation progressively improves with cycling. Its motional response and versatility are illustrated by some examples.

Citation Download Citation

Kazuo Onishi, Shingo Sewa, Kinji Asaka, Naoko Fujiwara, and Keisuke Oguro "Bending response of polymer electrolyte actuator", Proc. SPIE 3987, Smart Structures and Materials 2000: Electroactive Polymer Actuators and Devices (EAPAD), (7 June 2000); https://doi.org/10.1117/12.387770

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available