Paper
16 August 2000 Design of a convex and camera mirror support system for Altair, the Gemini-North adaptive optics system
Author Affiliations +
Abstract
The Convex Camera Structure (CCS) is a welded Invar structure that supports of the final two optical elements in the Altair science path. The CCS assembly holds the large camera mirror, a 295 mm diameter off-axis conic, in close relation with the smaller convex mirror, a 146 mm diameter off-axis conic. The image quality requirement imposed stringent spatial tolerance between the two mirrors: +/- 45 micrometers in axial separation, +/- 70 micrometers in decenter and +/- 30 arcsecond in allowable tilt. These tolerances include contributions from initial alignment error, geometrical and dimensional changes due to gravity and temperature. This paper gives an overview of the CCS and its associated components. Flexures are integral part of the CCS assembly, they are utilized to connect the CCS to the aluminum main optical bench, the mirror to the six degree- of-freedom mount, and the 6DOF mount to the CCS end plate. The design considerations and engineering analyses of the CCS assembly are outlined.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kei Szeto, Scott C. Roberts, Andre Anthony, Joeleff T. Fitzsimmons, Robert Gaunt, Jerry Sebesta, and Jean-Pierre Veran "Design of a convex and camera mirror support system for Altair, the Gemini-North adaptive optics system", Proc. SPIE 4008, Optical and IR Telescope Instrumentation and Detectors, (16 August 2000); https://doi.org/10.1117/12.395416
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Cameras

Temperature metrology

Mirror mounts

Assembly tolerances

Off axis mirrors

Optical benches

RELATED CONTENT

Optical design of COATLI an all sky robotic optical...
Proceedings of SPIE (August 09 2016)
Off-axis surface tolerance analysis: tips and tricks
Proceedings of SPIE (June 05 2018)
Image Parameters Of Large Multi-Component Mirrors
Proceedings of SPIE (February 21 1986)
Optical design for the AdOpt@TNG module
Proceedings of SPIE (March 21 1997)
Study of the image quality and stray light in the...
Proceedings of SPIE (July 19 2010)
Optical design of the 1 5 um infrared camera of...
Proceedings of SPIE (October 20 1993)

Back to Top