Collaborative robotic team design and integration

John R. Spofford; David J. Anhalt; Jennifer B. Herron; Brett D. Lapin

doi:10.1117/12.391634

10 July 2000 Collaborative robotic team design and integration

John R. Spofford, David J. Anhalt, Jennifer B. Herron, Brett D. Lapin

Proceedings Volume 4024, Unmanned Ground Vehicle Technology II; (2000) https://doi.org/10.1117/12.391634
Event: AeroSense 2000, 2000, Orlando, FL, United States

Abstract

Teams of heterogeneous mobile robots are a key aspect of future unmanned systems for operations in complex and dynamic urban environments, such as that envisions by DARPA's Tactical Mobile Robotics program. Interactions among such team members enable a variety of mission roles beyond those achievable with single robots or homogeneous teams. Key technologies include docking for power and data transfer, marsupial transport and deployment, collaborative team user interface, cooperative obstacle negotiation, distributed sensing, and peer inspection. This paper describes recent results in the integration and evaluation of component technologies within a collaborative system design. Integration considerations include requirement definition, flexible design management, interface control, and incremental technology integration. Collaborative system requirements are derived from mission objectives and robotic roles, and impact system and individual robot design at several levels. Design management is a challenge in a dynamic environment, with rapid evolution of mission objectives and available technologies. The object-oriented system model approach employed includes both software and hardware object representations to enable on- the-fly system and robot reconfiguration. Controlled interfaces among robots include mechanical, behavioral, communications, and electrical parameters. Technologies are under development by several organizations within the TMR program community. The incremental integration and validation of these within the collaborative system architecture reduces development risk through frequent experimental evaluations. The TMR system configuration includes Packbot-Perceivers, Packbot- Effectors, and Throwbots. Surrogates for these robots are used to validate and refine designs for multi-robot interaction components. Collaborative capability results from recent experimental evaluations are presented.

Citation Download Citation

John R. Spofford, David J. Anhalt, Jennifer B. Herron, and Brett D. Lapin "Collaborative robotic team design and integration", Proc. SPIE 4024, Unmanned Ground Vehicle Technology II, (10 July 2000); https://doi.org/10.1117/12.391634

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available