Paper
29 December 2000 Composite cure process optimization with the aid of fiber optic sensors
Boming Zhang, Zhanjun Wu, Danfu Wang
Author Affiliations +
Proceedings Volume 4202, Industrial Sensing Systems; (2000) https://doi.org/10.1117/12.411735
Event: Environmental and Industrial Sensing, 2000, Boston, MA, United States
Abstract
In order to improve the mechanic performance, the cure process mechanics are approached to find out the relationships among the viscosity history, void evolution and the ultimate mechanic property of the composite structure. A computer simulation program, on the base of resin flow model, thermal stress model, material model and void model, is developed to simulate the cure process, with which the cure process parameter is optimized to meet this challenge. The information of cure process, which mainly is the viscosity evolution and gel point, is obtained by fiber optic microbend sensor made specially. The reason to sensing and controlling the viscosity evolution is that it can represent the cure degree to some extent, besides, keep the viscosity at the lowest point as long as possible can reduce the void and keep appropriate fiber content in the ultimate composite structure. The data is processed by an expert system based on the computer simulation program, then the expert system give instruction to the temperature controller and pressure controller to regulate the cure process.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Boming Zhang, Zhanjun Wu, and Danfu Wang "Composite cure process optimization with the aid of fiber optic sensors", Proc. SPIE 4202, Industrial Sensing Systems, (29 December 2000); https://doi.org/10.1117/12.411735
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Composites

Fiber optics sensors

Computer simulations

Mechanics

Thermal modeling

Process control

Control systems

Back to Top