Atomic force metrology and 3D modeling of microtrenching in etched photomask features

Bradley Todd; Kirk Miller; Thomas V. Pistor

doi:10.1117/12.438409

5 September 2001 Atomic force metrology and 3D modeling of microtrenching in etched photomask features

Bradley Todd, Kirk Miller, Thomas V. Pistor

Proceedings Volume 4409, Photomask and Next-Generation Lithography Mask Technology VIII; (2001) https://doi.org/10.1117/12.438409
Event: Photomask and Next Generation Lithography Mask Technology VIII, 2001, Kanagawa, Japan

Abstract

We present a study of the micro-trenching caused by different quartz etch processes during the fabrication of phase-shift photomasks. Six different photomasks with quartz etches 320nm - 720nm deep were measured non-destructively by Atomic Force Microscopy (AFM) to explore the details of micro-trenching that occurs at the base of vertical walls. Results of etch profiles obtained using AFM metrology are correlated with electromigration (EM) modeling of alternating aperture phase shift masks for use with KrF 4X reduction steppers. The metrology and EM modeling results clearly differentiate each of the generic etch processes and predict the process window changes resulting from modeled micro-trenching relative to an ideal etch case. In particular, the ICP + wet etches show 50 percent less micro-trenching relative to three of the four RIE-only etch processes. Comparisons of micro-trenching lengths measured during these experiments with the results of trenching bias across different etched space widths as reported by McCallum, et al. suggest that micro-trenching is a universal phenomenon occurring during quartz etches. We propose that micro-trenching more correctly defines the geometries responsible for trenching bias. Finally, to show the effect of local geometry to the extent which trenching occurs, we study the depth detail in the vicinity of an unusually shaped phase bump defect. Trenching is more than 50 percent greater at the base of concave or acute defects as compared to convex defects. Local trenching may make repair more difficult for phase bump defects near or touching a vertical trench wall.

Citation Download Citation

Bradley Todd, Kirk Miller, and Thomas V. Pistor "Atomic force metrology and 3D modeling of microtrenching in etched photomask features", Proc. SPIE 4409, Photomask and Next-Generation Lithography Mask Technology VIII, (5 September 2001); https://doi.org/10.1117/12.438409

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available