Paper
11 March 2002 Verification of the effect of mask bias on the mask error enhancement factor of contact holes
Author Affiliations +
Abstract
The mask error enhancement factor for contact holes is experimentally determined for 180 nm features under a variety of exposure conditions. Since its magnitude depends, in part, upon the slope of the aerial image, the value is calculated as a function of binary and phase shift masks, mask bias, and conventional and quadrupole illumination. The primary purpose is to compare experimental results to a simulation study and determine which simulation trends are accurately predicted. The results show that isolated contacts have lower MEEF than dense contacts but that dense contacts do not necessarily have the largest error factor. The magnitude of MEEF and the optimal bias that minimizes it are show to be accurately predicted.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael T. Reilly, Stewart A. Robertson, Colin R. Parker, Doris Kang, Mircea V. Dusa, Susan S. MacDonald, and Craig A. West "Verification of the effect of mask bias on the mask error enhancement factor of contact holes", Proc. SPIE 4562, 21st Annual BACUS Symposium on Photomask Technology, (11 March 2002); https://doi.org/10.1117/12.443111
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Binary data

Scanning electron microscopy

Nanoimprint lithography

Optical testing

Image quality

Phase shifts

Back to Top