Paper
3 May 2002 Design and performance of a high-quality cardiac flat detector
Falko Busse, Walter Ruetten, Bernhard Sandkamp, P. Lex Alving, Raoul J. M. Bastiaens, Thierry Ducourant
Author Affiliations +
Abstract
A dynamic flat detector with optimized overall system design has been developed by Trixell together with its partners. This detector enables the application of flat detector technology in cardiac procedures, including difficult applications like low-dose fluoroscopy, and later extending to digital subtraction angiography and high-speed bi-plane. The key parameters for the optimized design are the high DQE over a large dose range, the excellent linearity and the temporal behavior of the detector. High DQE performance could be realized best by using a thick CsI layer for high absorption. This guarantees a salient MTF of 65 percent at 1 lp/mm and 37 percent at 2 lp/mm even for thick layers because the detrimental effects of the dead layer are avoided. The well known temporal artifacts problems associated with a:Si-CsI technology have been solved using flashes of light in combination with a reset sequence at the beginning of every frame, which keeps the traps in the a-Si photodiodes constantly filled. Switching dose levels therefore leads only to a marginal change in the trap occupation, resulting in a low temporal cross-talk. Experimental data for the mentioned applications are demonstrated.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Falko Busse, Walter Ruetten, Bernhard Sandkamp, P. Lex Alving, Raoul J. M. Bastiaens, and Thierry Ducourant "Design and performance of a high-quality cardiac flat detector", Proc. SPIE 4682, Medical Imaging 2002: Physics of Medical Imaging, (3 May 2002); https://doi.org/10.1117/12.465633
Lens.org Logo
CITATIONS
Cited by 27 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Modulation transfer functions

X-rays

Fluoroscopy

X-ray detectors

Photodiodes

Electronics

Back to Top