Paper
24 December 2002 Performance of cryogenically cooled monochromators at SPring-8
Author Affiliations +
Abstract
The performance of the SPring-8 cryogenic cooling system was examined extensively, especially, on the features closely related to the actual experimental situations. The cryogenic cooling system has sufficient cooling capability to handle the permitted highest heat load of 478 W at BL29XUL which equips the SPring-8 standard in-vacuum undulator. The effect of the heat load on the beam profile and the rocking curve width was reasonably small. The rocking curve width with Si 333 diffraction at 18.7 keV was close to the theoretical width 0.86”. Thus the monochromator conserves the good spatial coherence originating from the small source size of the undulator. Mechanical vibrations at frequencies of 30-100 Hz degraded the parallelism between the two monochromator crystals. The angular width of the mechanical vibration was measured to be 0.2” independent of the heat load and the flow rate of the circulating liquid nitrogen. The output intensity was stable and had no drift under any heat load. On the other hand, it took a few hours before the output energy stabilized, when the heat load was increased from 0.135 to 112 W.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kenji Tamasaku, Makina Yabashi, Daigo Miwa, Tetsuro Mochizuki, and Tetsuya Ishikawa "Performance of cryogenically cooled monochromators at SPring-8", Proc. SPIE 4782, X-Ray Mirrors, Crystals, and Multilayers II, (24 December 2002); https://doi.org/10.1117/12.450980
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Crystals

Monochromators

Liquids

Nitrogen

Laser crystals

Cryogenics

Cooling systems

Back to Top