Paper
13 September 2002 Characteristics of modulated white LED and their application to electrically controlled spectroscopy
Author Affiliations +
Abstract
We have investigated characteristics of a commercially available one-chip white-LED based on indium-doped gallium nitride when modulating with an electrical pulse. The observation of a spectrum of the white-LED revealed that it contained four large peaks at wavelengths of 390nm (ultra-violet), 430nm (blue), 510nm (green), and 620nm (red), respectively. When the LED was modulated by use of a squared pulse signal with a 16kHz repetition frequency and an 85% duty cycle, each color exhibited different electric characteristics: ultra-violet and blue colors showed the similar electrical spectrum of the original input signal having three frequency bands (1st band: 16~108kHz, 2nd band: 108~208kHz, 3rd band: 208~320kHz), meanwhile a green color was presented in the two bands and a red component did not manifested in any bands. The measured result can be explained in terms of different response of the fluorescent materials responsible for the light emission. Use of electrical band filters enables to separate a white light into desired one.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yasuyuki Okamura, Tatsuo Shiina, and Masafumi Ito "Characteristics of modulated white LED and their application to electrically controlled spectroscopy", Proc. SPIE 4922, Color Science and Imaging Technologies, (13 September 2002); https://doi.org/10.1117/12.483144
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Optical filters

Ultraviolet radiation

Modulation

Gallium nitride

Spectroscopes

Electronic filtering

Back to Top