Modified model of drying process of a polymer liquid film taking effects of latent heat and heat conductivity into account

Hiroyuki Kagami

doi:10.1117/12.504191

28 August 2003 Modified model of drying process of a polymer liquid film taking effects of latent heat and heat conductivity into account

Hiroyuki Kagami

Author Affiliations +

Proceedings Volume 5130, Photomask and Next-Generation Lithography Mask Technology X; (2003) https://doi.org/10.1117/12.504191
Event: Photomask and Next Generation Lithography Mask Technology X, 2003, Yokohama, Japan

Abstract

In Photomask Japan 2002 we reported a model of coating and drying process for the flat polymer (resist) film fabrication. The model models the process that polymer solution coated on a flat substrate by scanning technique, which is developed for LSI technologies at the next generation, is dried under reduced pressure. After above drying process, a resist film having a typical thickness profile that the edge of the film is thicker and just the region next to the edge's bump is thinner. Using the model, we numerically clarified the bumpy structure of the edge of a resist film depended on some essential parameters -- vaporization rate, diffusion coefficients coated solution thickness, intrinsic viscosity and so on. But the former model doesn't include the effects of a drop of temperature on the surface of a liquid film and the inside of it by latent heat and diffusion of heat by conductivity. But we cannot ignore these effects since a drop of temperature is essential in phase transition. And change of diffusion coefficients and viscosity by the drop of temperature has an important influence on the model. In this paper, we will report the modified model taking a drop of temperature on the surface of a liquid film and the inside of it by latent heat and diffusion of heat by conductivity and change of diffusion coefficients and viscosity by it into consideration and numerical results using the model.

Citation Download Citation

Hiroyuki Kagami "Modified model of drying process of a polymer liquid film taking effects of latent heat and heat conductivity into account", Proc. SPIE 5130, Photomask and Next-Generation Lithography Mask Technology X, (28 August 2003); https://doi.org/10.1117/12.504191

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available