Paper
1 June 2004 Effect of joint configuration on high-power diode laser welding of steel
Author Affiliations +
Abstract
High power diode laser was the first semiconductor laser used for materials processing. It has found some areas of applications in production. The most promising applications of HPDL in mechanical engineering are in thin steel sheet welding and hardening. The HDPL welding process is at this moment usually performed as conduction limited welding process. In this study the effect of joint configuration and beam properties on the efficiency of welding with HPDL were examined. Joint types tested were bead on plate and butt joint with different joint manufacture. The laser parameters tested were beam intensity, welding speed, incidence angle of laser beam and focal spot size. The tested parameters had an effect on the weld quality and the welding speed. The higher the beam intensity is the higher the welding speed can be achieved. The reliable welding parameters can be established for the welding of various industrial products.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Antti S. Salminen, Anna Fellman, and Veli Kujanpaa "Effect of joint configuration on high-power diode laser welding of steel", Proc. SPIE 5336, High-Power Diode Laser Technology and Applications II, (1 June 2004); https://doi.org/10.1117/12.529077
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser welding

Semiconductor lasers

Silver

High power diode lasers

Manufacturing

Laser cutting

Beam shaping

RELATED CONTENT


Back to Top