Paper
19 February 2004 Laser ablation thresholds of polymer materials studies
Ellina I. Voronina, Vladimir P. Efremov, Vadim E. Privalov, Valery G. Shemanin
Author Affiliations +
Proceedings Volume 5381, Lasers for Measurements and Information Transfer 2003; (2004) https://doi.org/10.1117/12.547692
Event: Lasers for Measurements and Information Transfer 2003, 2003, St. Petersburg, Russian Federation
Abstract
The polymer films are widely used as the reflecting materials in any type of optical system. It demands the detail studies of the basics and threshold parameters of laser ablation destruction such a materials in the power laser radiation with pulse energy density in range from 1 up to 100 J/cm2. The probability of the target laser ablation destruction versus the incident laser radiation energy density dependencies for any polymers - the high pressure polyethylene, eopxy compound, polytetraphluoroethylene and rubber for comparing - have been a subject of the experimental studies. It takes into account all of the energy distribution channels - reflectance, scattering and absorbance for laser ablation of these samples. These results show that about 11% of absorbed laser pulse energy was transfered to the target as the shock wave spreading in it when the target thickness is greater than the distance which this shock wave spreads in the time of laser pulse action.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ellina I. Voronina, Vladimir P. Efremov, Vadim E. Privalov, and Valery G. Shemanin "Laser ablation thresholds of polymer materials studies", Proc. SPIE 5381, Lasers for Measurements and Information Transfer 2003, (19 February 2004); https://doi.org/10.1117/12.547692
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser ablation

Pulsed laser operation

Plasma

Laser energy

Polymers

Laser damage threshold

Glasses

Back to Top