Paper
2 September 2004 Adaptive filtering for air-to-ground surveillance
Author Affiliations +
Abstract
This paper introduces a new concept for air-to-ground noise radar based on adaptive filtering. A transmitting antenna illuminates a region of interest with a continuous, noise waveform. The processor within the receiver treats the illuminated scene as a linear system with unknown coefficients which filters the transmitted signal. Given access to the transmitted waveform and the digitized backscattered signal, the receiver adaptively estimates the unknown filter coefficients, using the same processing architecture as a wireless channel equalizer, and continues to update their values as the transmitter and receiver traverse their flight paths. The adapted filters correspond to range profiles of the illuminated scene which may be Doppler processed to yield synthetic aperture imagery.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Brian D. Rigling "Adaptive filtering for air-to-ground surveillance", Proc. SPIE 5427, Algorithms for Synthetic Aperture Radar Imagery XI, (2 September 2004); https://doi.org/10.1117/12.539875
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Radar

Receivers

Synthetic aperture radar

Signal processing

Electronic filtering

Digital filtering

Doppler effect

RELATED CONTENT

Digital processing of meter waveband SAR data
Proceedings of SPIE (December 21 1994)
The feasibility of a multibeam delay/Doppler radar altimeter
Proceedings of SPIE (November 03 2010)
Hybrid space-airborne bistatic SAR geometric resolutions
Proceedings of SPIE (September 29 2009)
The concept of a multibeam delay/Doppler radar altimeter
Proceedings of SPIE (October 03 2011)

Back to Top