Paper
12 October 2004 SiC ultralight mirror for large space telescope and for extremely huge ground-based telescope II
Noboru Ebizuka, Hiroaki Eto, Yutang Dai, Toru Suzuki, Weimin Lin, Hitoshi Omori, Toshikazu Ebisuzaki, Hideki Takami
Author Affiliations +
Abstract
SiC (silicon carbide) lightweight mirrors are used for a large number of space telescopes, and SiC is also candidate as hopeful material for segmented mirrors of the next generation ground based telescopes from 30 to 100 m in diameter. However, an SiC mirror is difficult to shape because the material is very hard and brittle. We are developing an SiC mirror by means of the ELID (ELectrolytic In-process Dressing) grinding method, a grinding machine with rotary table of 800 mm in diameter and precision of 10 nm in control resolution, and computational simulations. The ELID grinding method is versatile for fabrications of very hard materials. In this study, we introduce test fabrications of SiC mirrors with 360 mm in diameter and equilateral triangle rib structures in the rear face. We developed a support tool with air actuator and oil pressure clamp for suppression of the mirror deformation for manufacturing of the thin mirror.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Noboru Ebizuka, Hiroaki Eto, Yutang Dai, Toru Suzuki, Weimin Lin, Hitoshi Omori, Toshikazu Ebisuzaki, and Hideki Takami "SiC ultralight mirror for large space telescope and for extremely huge ground-based telescope II", Proc. SPIE 5487, Optical, Infrared, and Millimeter Space Telescopes, (12 October 2004); https://doi.org/10.1117/12.551027
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Silicon carbide

Space telescopes

Iron

Diamond

Telescopes

Actuators

Back to Top