Paper
8 March 2005 Impact of industrial needs on advances in laser technology
Author Affiliations +
Abstract
Lasers have become accepted "tools" by a number of industries. Everything from cars to heart pacemakers to greeting cards are now using lasers to cut, drill, clad, heat treat, and weld/join. The market for industrial laser systems is expanding. For the first quarter of 2004 the sales in lasers systems increased 40% to over $120 million1. Some of this increase in sales may be due to the fact that lasers are now considered reliable and have proven to be economical. The primary industrial laser systems today are the CO2 and Nd:YAG (lamp pumped) lasers especially at the higher powers. Both laser designs have evolved in power, beam quality, and reliability. At the same time laser manufacturers have developed methods to decrease the fabrication cost for the lasers. While these improvements have had a major impact on the operating cost of lasers, significant additional improvements do not seem possible in the near future for these lasers. As a result other advances in laser technologies (diode, diode pumped Nd:YAG, disc, and Yb fiber) are being examined.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Paul Edward Denney "Impact of industrial needs on advances in laser technology", Proc. SPIE 5706, Critical Review: Industrial Lasers and Applications, (8 March 2005); https://doi.org/10.1117/12.601661
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser applications

Fiber lasers

Diodes

Nd:YAG lasers

Semiconductor lasers

Gas lasers

Laser development

RELATED CONTENT

Simple, compact, and low cost CO2 laser driven by fast...
Proceedings of SPIE (February 22 2017)
High power diode and solid state lasers
Proceedings of SPIE (January 13 2017)
A critical review of laser beam welding
Proceedings of SPIE (March 08 2005)
Fabricating subwavelength fiber taper using a CO2 laser
Proceedings of SPIE (January 10 2005)

Back to Top