Paper
30 June 2005 A programmable baseband chain for a WCDMA/WLAN (802.11b) multi-standard zero-IF receiver
Author Affiliations +
Proceedings Volume 5837, VLSI Circuits and Systems II; (2005) https://doi.org/10.1117/12.608661
Event: Microtechnologies for the New Millennium 2005, 2005, Sevilla, Spain
Abstract
As we move towards convergent 4G Wireless encompassing both 3G cellular (WCDMA) for wide area networks and Wireless LAN for ”hot-spots”, the development of low power, low cost multi-band multi-standard wireless chipset solutions is a must. To this end this paper presents a programmable architecture for an analog baseband chain intended for use in a zero-IF multi-standard WCDMA/WLAN(802.11b) radio receiver. It also addresses the DC offset cancellation in the baseband chain. This is one of the major impairments in zero-IF receivers whose simplicity makes them suitable for single-chip multi-standard designs but where DC offset can reduce the receiver performance if a proper DC offset cancellation scheme is not devised. System level design of the baseband chain is given leading to design specifications of the different blocks in the chain. Extensive simulations carried out in MATLAB/SimuLink at the system level and in Cadence design tools at the circuit level show the performance of the system. The circuits will be fabricated in a 0.18μm CMOS process for a 1.8 V power supply.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Delia Rodriguez de Llera Gonzalez and Mohammed Ismail "A programmable baseband chain for a WCDMA/WLAN (802.11b) multi-standard zero-IF receiver", Proc. SPIE 5837, VLSI Circuits and Systems II, (30 June 2005); https://doi.org/10.1117/12.608661
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Homodyne detection

Linear filtering

Receivers

Digital filtering

Mirrors

Amplifiers

Capacitors

Back to Top