Coupled photo-thermal and time resolved reflectivity methods to original investigation of laser/material nanosecond interaction

N. Semmar; J. Martan; O. Cibulka; E. Le Menn; C. Boulmer-Leborgne

doi:10.1117/12.669107

7 June 2006 Coupled photo-thermal and time resolved reflectivity methods to original investigation of laser/material nanosecond interaction

N. Semmar, J. Martan, O. Cibulka, E. Le Menn, C. Boulmer-Leborgne

Author Affiliations +

Proceedings Volume 6261, High-Power Laser Ablation VI; 626123 (2006) https://doi.org/10.1117/12.669107
Event: High-Power Laser Ablation 2006, 2006, Taos, NM, United States

Abstract

A high number of papers were published on the simulation of laser/surface interaction at the level of nanosecond scale. Several assumptions on thermal properties data, laser spot homogeneity, were assumed for describing as well as possible the boundary conditions, the mathematical writing and finally the numerical or the analytical results. A few tentative of surface temperature monitoring during laser processing were proposed for the numerical validation. Also, simulation of the melting kinetics is rarely directly compared to in situ experiments. It is very hard to determine the time duration of a melting pool by in situ experiments. It should be the same for the surface temperature. A new method to plot the thermal history of the surface by using a combination of the Time Resolved Reflectivity (TRR) and the Pulsed Photo-Thermal (PPT) or Infrared Radiometry (IR) methods is proposed in this paper. Surface temperature, melting kinetics, threshold of melting and threshold of plasma formation are determined in the case of KrF laser spot in interaction with several materials. In the first step, the experimental setup including fast detectors (IR, UV, Vis.) and related optical devices is described. In the second step, typical results (TRR and IR spectra) for monocrystaline silicon are presented and discussed. Namely, phase change transitions (melting and resolidification) are detected versus fluence change and number of laser shots change. TRR and IR spectra of metallic surfaces (Cu, Mo, Ni, Stainless steel 15330 and 17246, Sn, Ti), are measured. For each sample the surface temperature during heating, the threshold of melting, melting duration and the threshold of plasma formation are directly deduced.

Citation Download Citation

N. Semmar, J. Martan, O. Cibulka, E. Le Menn, and C. Boulmer-Leborgne "Coupled photo-thermal and time resolved reflectivity methods to original investigation of laser/material nanosecond interaction", Proc. SPIE 6261, High-Power Laser Ablation VI, 626123 (7 June 2006); https://doi.org/10.1117/12.669107

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available