Paper
27 April 2007 A small and fast piezo-actuated legged robot
Abdul A. Yumaryanto, Jaebum An, Sangyoon Lee
Author Affiliations +
Abstract
In this paper we present the development of a small and fast LIPCA-actuated mobile robot. LIPCA (Lightweight Piezoceramic Composite curved Actuator) is a piezo-composite actuator that uses a PZT layer sandwiched between composite materials of carbon/epoxy and glass/epoxy layers to amplify the displacement. Three versions of LIPCA robots have been developed thus far to implement a small and autonomous robot. The design of the first prototype was inspired by a six-legged insect like a cockroach. Its maximum speed is 173 mm/sec with the voltage input of 400 Vpp at 40 Hz frequency. As the result of a slight modification in the design, a faster LIPCA robot was developed. However their structures are not strong enough to carry a load heavier than 20 gram, which can be a major obstacle to implementing autonomous robots. By several changes in the mechanism, the LIPCA-actuated robot has been improved such that it is able to carry a weight as much as 60 gram. For all the prototypes we used two LIPCA strips that are placed oppositely in the middle of the robot body. The LIPCA strips are driven by a square signal function of high AC voltage with the phase difference of 180°. All the experimental results show a possibility of a small and fast walking robot actuated by LIPCA without using any conventional electromagnetic actuator.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Abdul A. Yumaryanto, Jaebum An, and Sangyoon Lee "A small and fast piezo-actuated legged robot", Proc. SPIE 6525, Active and Passive Smart Structures and Integrated Systems 2007, 65250T (27 April 2007); https://doi.org/10.1117/12.715627
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Prototyping

Actuators

Composites

Mobile robots

Ceramics

Electromagnetism

Power supplies

Back to Top