Evaluating the mechanical integrity of bilayer lipid membranes using a high-precision pressurization system

David Hopkinson; Donald J. Leo

doi:10.1117/12.715643

25 April 2007 Evaluating the mechanical integrity of bilayer lipid membranes using a high-precision pressurization system

David Hopkinson, Donald J. Leo

Author Affiliations +

Proceedings Volume 6526, Behavior and Mechanics of Multifunctional and Composite Materials 2007; 652611 (2007) https://doi.org/10.1117/12.715643
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2007, San Diego, California, United States

Abstract

A new methodology has been developed to measure the mechanical integrity of a bilayer lipid membrane (BLM) formed over porous substrates. A custom test fixture was fabricated in which a stepper motor linear actuator drives a piston in order to apply pressure to a BLM in very fine increments. The pressure, monitored with a pressure transducer, is observed to increase until the BLM reaches its failure pressure, and then drop. This experiment was performed on 1-Stearoyl-2-Oleoyl-sn-Glycero-3-Phosphocholine (SOPC) lipid bilayers formed over porous polycarbonate substrates with various pore sizes ranging from 0.05 - 10 &mgr;m in diameter. A trend of increasing failure pressure with decreasing pore size was observed. The same set of experiments was repeated for BLMs that were formed from a mixture of SOPC and cholesterol (CHOL) at a cholesterol concentration of 50 mol%. The presence of cholesterol was found to increase the failure pressure of the BLMs by 1.5 times on average. A model of the characteristic pressure curve from this experiment was developed based on an initially closed fluid system in which pressure increases as it is loaded by a moving piston, and which upon reaching a critical failure pressure allows pressure to decrease as fluid escapes through a porous medium. Since the BLM is formed over many pores, this model assumes that the failure pressure for each micro-BLM follows a normal distribution over all pores. The model is able to accurately predict the major trends in the pressurization curves by curve-fitting a few statistical parameters.

Citation Download Citation

David Hopkinson and Donald J. Leo "Evaluating the mechanical integrity of bilayer lipid membranes using a high-precision pressurization system", Proc. SPIE 6526, Behavior and Mechanics of Multifunctional and Composite Materials 2007, 652611 (25 April 2007); https://doi.org/10.1117/12.715643

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available