Paper
17 October 2007 3D waveguides with fiber couplers and 90 degree bends in holographic photopolymer
Robert R. McLeod, Matthew S. Kirchner, Keith Kamysiak, Amy C. Sullivan, Michael C. Cole
Author Affiliations +
Abstract
Two active areas of research in the field of integrated optics are the coupling of on-chip waveguides to off-chip optical fibers and the reduction of circuit size which is dominated by the minimum bend radius of waveguides. Traditional approaches using mask-based lithography involve the complex etching of micro-mechanical on-chip mounts for the fiber or total-internal-reflection facets for sharp waveguide bends. Holographic photopolymers have several unique properties that enable a significantly simpler approach to both problems. Chief among these are the ability to be cast with low stress around embedded components and the ability to create localized 3D index structures. This is demonstrated by the fabrication of optical waveguides which couple directly to encapsulated fibers after making 90 degree bends off of encapsulated front-surface mirrors. The results are low loss and significantly simpler than existing approaches.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Robert R. McLeod, Matthew S. Kirchner, Keith Kamysiak, Amy C. Sullivan, and Michael C. Cole "3D waveguides with fiber couplers and 90 degree bends in holographic photopolymer", Proc. SPIE 6657, Organic 3D Photonics Materials and Devices, 66570F (17 October 2007); https://doi.org/10.1117/12.740796
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Polymers

Mirrors

Holography

Fiber couplers

Optical fibers

Etching

Back to Top