Paper
10 July 2008 Evaluation of thermal control coatings exposed to ambient weather conditions at Haleakalä High Altitude Observatory
Author Affiliations +
Abstract
The derived heat loads from thermal models are used to size the equipment that controls exterior enclosure seeing for the Advanced Technology Solar Telescope. These loads are highly dependent on the radiative properties assumed for the surface coatings of the enclosure. The properties of traditional white coatings and paints are known to degrade with time as they are exposed to the elements, but not by how much or how quickly. The solar reflectance and thermal emissivity of coatings considered for use on the enclosure, in a weathered condition, are not readily available from coatings manufacturers or in the scientific literature. The results from a one-year test of nine different coatings that were weathered at the summit of Haleakala on the island of Maui, Hawaii are reported and discussed.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
L. Phelps "Evaluation of thermal control coatings exposed to ambient weather conditions at Haleakalä High Altitude Observatory", Proc. SPIE 7012, Ground-based and Airborne Telescopes II, 701230 (10 July 2008); https://doi.org/10.1117/12.789156
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Reflectivity

Manufacturing

Observatories

Thin film coatings

Photography

Cements

Thermal modeling

Back to Top