Paper
9 July 2008 Advanced Technology Solar Telescope lower enclosure thermal system
Author Affiliations +
Abstract
The exterior of the Advanced Technology Solar Telescope enclosure requires cooling to eliminate so-called external dome seeing caused by solar loading during the observing day. This is achieved by way of coolant circulation through external plate coil panels, thereby maintaining the exterior surfaces of the enclosure at or just below ambient air temperature. As the distance from the optical path increases (e.g., on the surface of the lower enclosure), the stringency of the temperature requirement is diminished, thereby allowing a greater difference between the surface temperature and the ambient air temperature. This paper presents a comparison of the modeled performance of an active thermal control strategy on the lower enclosure to a passive strategy that employs concrete panels. A life-cycle cost analysis of each option is also presented.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
L. Phelps and M. Warner "Advanced Technology Solar Telescope lower enclosure thermal system", Proc. SPIE 7017, Modeling, Systems Engineering, and Project Management for Astronomy III, 701719 (9 July 2008); https://doi.org/10.1117/12.789340
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sun

Solar telescopes

Fluctuations and noise

Observatories

Control systems

Particles

Thermal modeling

RELATED CONTENT

Software controls for the ATST Solar Telescope
Proceedings of SPIE (September 15 2004)
ATST enclosure mechanical and thermal models
Proceedings of SPIE (November 10 2011)
Site survey for a large solar telescope
Proceedings of SPIE (August 25 1998)

Back to Top