Diamond machining of aspherical mirrors and mirror arrays for Integral Field Units: part II. Metrology

Stephen Rolt; David R. Robertson

doi:10.1117/12.789332

23 July 2008 Diamond machining of aspherical mirrors and mirror arrays for Integral Field Units: part II. Metrology

Stephen Rolt, David R. Robertson

Proceedings Volume 7018, Advanced Optical and Mechanical Technologies in Telescopes and Instrumentation; 70183S (2008) https://doi.org/10.1117/12.789332
Event: SPIE Astronomical Telescopes + Instrumentation, 2008, Marseille, France

Abstract

The application of freeform diamond machining techniques to the manufacture of precision optics for astronomical instrumentation has opened up a wide range of exciting new design possibilities. Freeform surfaces, not limited by symmetry considerations, and complex multi-faceted mirror arrays can be precisely machined. This capability has removed many constraints from the design process and has enabled the fulfilment of radical instrument designs. However, this flexibility poses a significant challenge for component characterisation. Accurate measurement of the form accuracy of surfaces lacking symmetry is particularly difficult using standard interferometric techniques. Furthermore, the accurate 3 dimensional characterisation of complex multi-faceted components presents an added challenge. The authors describe techniques that have been applied to the measurement of complex surfaces in Integral Field Units (IFUs). In particular, we present novel approaches for the measurement of the form of complex non-radially symmetric surfaces to an accuracy of a few nanometres. These measurements use a Twyman-Green Interferometer configured in a variety of non-standard arrangements. In addition, the authors consider the difficulties in the measurement of multifaceted surfaces, and the accurate determination of the geometric relations between these surfaces. The authors discuss the use of confocal gauge techniques in the characterisation of these surfaces.

Citation Download Citation

Stephen Rolt and David R. Robertson "Diamond machining of aspherical mirrors and mirror arrays for Integral Field Units: part II. Metrology", Proc. SPIE 7018, Advanced Optical and Mechanical Technologies in Telescopes and Instrumentation, 70183S (23 July 2008); https://doi.org/10.1117/12.789332

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available