Paper
28 April 2009 Optofluidic tuning of multimode interference fiber filters
Author Affiliations +
Abstract
We report on the optofluidic tuning of MMI-based bandpass filters. It is well known that MMI devices exhibit their highest sensitivity when their diameter (D) is modified, since they have a D2 wavelength dependence. In order to increase the MMF diameter we use a special fiber, called No-Core fiber, which is basically a MMF with a diameter of 125 μm with air as the cover. Therefore, when this No-Core fiber is immersed in liquids with different refractive indexes, as a result of the Goes-Hänchen shift the effective width (fundamental mode width) of the No-Core fiber is increased, and thus the peak wavelength is tuned. A tunability of almost 40 nm in going from air (n=1.333) to ethylene glycol (n=1.434) was easily obtained, with a minimum change in peak transmission, contrast, and bandwidth. Moreover, since replacing the entire liquid can be difficult, the device was placed vertically and the liquid was covering the No-Core fiber in small steps. This provided similar amount of tuning as before, but a more controllable tuning mechanism.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. E. Antonio-Lopez, D. A. May-Arrioja, and P. LiKamWa "Optofluidic tuning of multimode interference fiber filters", Proc. SPIE 7339, Enabling Photonics Technologies for Defense, Security, and Aerospace Applications V, 73390D (28 April 2009); https://doi.org/10.1117/12.818941
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical filters

Brain-machine interfaces

Liquids

Refractive index

Tunable filters

Single mode fibers

Multimode interference devices

RELATED CONTENT


Back to Top