Paper
18 May 2009 Refractometric sensor based on all-fiber coaxial Michelson interferometers
Author Affiliations +
Abstract
All-fiber coaxial Michelson interferometers are compact and very stable interferometers that can be dipped directly into water solutions for chemical and biological sensing. The sensitivity of the cladding mode to the surrounding medium can be exploited to use the interferometer as a compact fiber refractometer. Several interferometers have been fabricated and characterized as glucose sensors. A first series of devices were designed to work at 1550 nm, while a second series was prepared to work at 850 nm. Thus, the second series of interferometers enables the use of compact, robust and low cost optical spectrum analyzers. In our present experiments, the length of the fiber that forms the interferometer was within the range 1-10 cm. When the shift of the spectrum maxima were measured as a function of the glucose concentration, a slope of 350 pm/% was achieved. The use of the 850 nm sensor heads as a portable sensor system to monitor sewage treatment plants is shown.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Paola Barrios, David Sáez-Rodríguez, Amparo Rodríguez, José L. Cruz, Antonio Díez, and Miguel V. Andrés "Refractometric sensor based on all-fiber coaxial Michelson interferometers", Proc. SPIE 7356, Optical Sensors 2009, 735607 (18 May 2009); https://doi.org/10.1117/12.820675
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Head

Interferometers

Glucose

Water

Interferometry

Cladding

Back to Top