XUV metrology: surface analysis with extreme ultraviolet radiation

M. Banyay; L. Juschkin; T. Bücker; P. Loosen; A. Bayer; F. Barkusky; S. Döring; C. Peth; K. Mann; H. Blaschke; I. Balasa; D. Ristau

doi:10.1117/12.833648

18 May 2009 XUV metrology: surface analysis with extreme ultraviolet radiation

M. Banyay, L. Juschkin, T. Bücker, P. Loosen, A. Bayer, F. Barkusky, S. Döring, C. Peth, K. Mann, H. Blaschke, I. Balasa, D. Ristau

Author Affiliations +

Proceedings Volume 7361, Damage to VUV, EUV, and X-Ray Optics II; 736113 (2009) https://doi.org/10.1117/12.833648
Event: SPIE Optics + Optoelectronics, 2009, Prague, Czech Republic

Abstract

The utilization of nanostructured materials for modern applications gained more and more importance during the last few years. As examples super-fluorescent quantum dots, the use of carbon nano tubes (CNTs) in microelectronics, electrospun fibers in filter membranes, thin film coatings for solar cells, mirrors or LEDs, semiconductor electronics, and functionalized surfaces may be named to address only a few topics. To optimize the systems and enable the full range of capabilities of nanostructures a thorough characterization of the surface-near topography (e.g. roughness, thickness, lateral dimension) as well as of the chemical composition is essential. As a versatile tool for spatial and chemical characterization XUV reflectometry, scatterometry and diffractometry is proposed. Three different experimental setups have been realized evaluating spectral resolved reflectance under constant incidence angle, angular resolved reflectance at a constant wavelength, or a combined approach using laboratory scaled XUV sources to gain insight into chemical composition, film thickness and surface/interface roughness. Experiments on near-edge X-ray absorption fine structure spectroscopy (NEXAFS) at the carbon K-edge have been performed. The investigated systems range from synthetic polymers (PMMA, PI) over organic substances (humic acids) to biological matter (lipids), delivering unique spectra for each compound. Thus NEXAFS spectroscopy using a table-top XUV source could be established as a highly surface sensitive fingerprint method for chemical analysis. Future extended experiments will investigate the silicon L-edge where e.g. silicon oxide interlayers below high-k or other nano-layered material on Sisubstrates depict a technological important group of composite systems.

Citation Download Citation

M. Banyay, L. Juschkin, T. Bücker, P. Loosen, A. Bayer, F. Barkusky, S. Döring, C. Peth, K. Mann, H. Blaschke, I. Balasa, and D. Ristau "XUV metrology: surface analysis with extreme ultraviolet radiation", Proc. SPIE 7361, Damage to VUV, EUV, and X-Ray Optics II, 736113 (18 May 2009); https://doi.org/10.1117/12.833648

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE