Paper
18 May 2010 Device history dependent effects in dark injection transient current measurements of charge mobility in organic light-emitting diodes
Steven Knox, Helen Jones, Trevor Esward
Author Affiliations +
Abstract
Charge mobility is a key parameter for understanding the performance of organic semiconductor devices and materials. A range of techniques is available that can measure charge mobility with varying accuracy and precision. We review the dark injection transient current method from a metrology perspective with a particular emphasis on quantification of uncertainties that arise from the technique itself and from the inherent variability of devices and materials. We have carried out a systematic study of the space-charge-limited dark injection transient current technique as a method of measuring charge mobility in polymer organic light emitting diodes, paying particular attention to varying the amplitude, duration and repetition rate of the applied voltage and to environmental factors such as changes in the ambient temperature. We show that the results of the experiment depend strongly on the previous history of the device and that both long-term and short-term effects can be identified. As a result, we are able to quantify the contribution of these effects to the uncertainties associated with estimates of charge mobility obtained using the dark injection method.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Steven Knox, Helen Jones, and Trevor Esward "Device history dependent effects in dark injection transient current measurements of charge mobility in organic light-emitting diodes", Proc. SPIE 7722, Organic Photonics IV, 772218 (18 May 2010); https://doi.org/10.1117/12.854217
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Organic light emitting diodes

Measurement devices

Organic semiconductors

Polymers

Temperature metrology

Electrodes

Metrology

Back to Top