Paper
3 September 2010 Optical pulse generation system based on OTDM technique for SG-III Laser Facility
Author Affiliations +
Abstract
The optical pulse generation system of SG-III laser facility is presented. The optical time division multiplexing (OTDM) technique, high speed electro-optic modulation technique, pulse single-selected based on polarization independently acousto-optic modulation technique and pulse polarization stabilization technique applied in low repetition rate mode are successfully employed in the system. And also the phase modulation unit is at the last stage of the system, which could avoid FM-AM effect induced in fiber system. The test experiment results showed that the demonstrated specification is better than the designed to a certain degree.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jian-jun Wang, Dang-peng Xu, Ming-zhong Li, Hong-huan Lin, Rui Zhang, Ying Deng, Na Zhu, and Shou-huan Zhou "Optical pulse generation system based on OTDM technique for SG-III Laser Facility", Proc. SPIE 7795, Optical Technologies for Arming, Safing, Fuzing, and Firing VI, 77950G (3 September 2010); https://doi.org/10.1117/12.858817
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polarization

Modulators

Pulsed laser operation

Fiber lasers

Laser systems engineering

Fiber optics

Modulation

Back to Top