Paper
9 November 2010 Development of a real time MTF test bench for visible optical systems
Author Affiliations +
Abstract
A real-time MTF test bench for visible optical systems is presented in this paper. This test bench can perform quick on-axis and off-axis MTF measurement of optical systems whose aperture are less than 200mm in visible wavelength. A high quality off-axis parabolic collimator is used as object generator of this test bench. The image analyzer is a microscopy with CCD camera installed on a multi-axis motion stage. The software of this MTF test bench provides a good interface for the operators to set measurement parameters and control this bench. Validation of this test bench, performed with a 50mm plano-convex audit lens, shows that MTF measurement error of this bench is within 0.04. Besides MTF measurement, this bench can also perform effective focal length (EFL) and back focal length (BFL) without any hardware modification. Transmittance of optical system can also be performed on this bench with an integrating sphere.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xinhua Chen, Yuheng Chen, Jiming Fan, Chunchang Xiang, and Weimin Shen "Development of a real time MTF test bench for visible optical systems", Proc. SPIE 7849, Optical Design and Testing IV, 784926 (9 November 2010); https://doi.org/10.1117/12.870157
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulation transfer functions

Image analysis

CCD cameras

Optical testing

Point spread functions

Transmittance

Mirrors

Back to Top