Paper
9 November 2010 Testbed for an adaptive secondary mirror of 1.8m telescope
Xinlong Fan, Chunlin Guan, Changhui Rao
Author Affiliations +
Abstract
Testbed for an adaptive secondary mirror of 1.8m telescope is a system, which originates from Simpson-Oland-Meckel method. The testbed is composed of Hartmann-Shack (H-S) wavefront sensor, Hindle element and analysis element. Light from H-S wavefront sensor passes through the Hindle element and reflects off of the adaptive secondary mirror. It then is reflected by the concave surface of the Hindle element. After reflecting off of the adaptive secondary mirror again, it passes through the Hindle element and return to the H-S wavefront sensor. A beam splitter is placed between H-S wavefront sensor and Hindle element to reflect part of the output light to analysis element. The testbed is a low cost simple system that allows testing the convex hyperboloid adaptive secondary mirror. It also could be used to calibrate the adaptive secondary mirror as well as investigating higher performance control loops. Optical setup design, tolerance of fabrication, alignment and material asymmetry are presented in this paper.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xinlong Fan, Chunlin Guan, and Changhui Rao "Testbed for an adaptive secondary mirror of 1.8m telescope", Proc. SPIE 7849, Optical Design and Testing IV, 784928 (9 November 2010); https://doi.org/10.1117/12.870204
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Telescopes

Wavefront sensors

Wavefronts

Calibration

Adaptive optics

Tolerancing

Back to Top