Paper
14 February 2011 Single quantum dot (QD) manipulation on nanowire using dielectrophoretic (DEP) force
J. Kim, S. Y. Lee, J.-K. F. Suh, J. H. Park, H. J. Shin
Author Affiliations +
Abstract
Au nanowires of 100 nm, 200nm and 400 nm widths with micro scale Au electrode were fabricated as electrodes to apply high electric field gradient for strong DEP force within the nanometer range. Au nanowires were fabricated on a silicon dioxide (SiO2) using lift-off process after e-beam lithography and e-beam evaporation. E-beam resister (ER) was patterned and a 50 nm thick Au layer. Photo resister (PR) was patterned to make Au microelectrode and did lift-off process. The Au nanowires with microelectrode were covered with SiO2 layer deposited with PECVD resulting in 1 um thick. Opened end of gold nanowires, the target surface for QD immobilization, were formed using etching processes. Single QD immobilization on the nanowire end-facet was accomplished through positive DEP force. Sine wave of 8 Vpp intensity and 3 MHz frequency was applied and it induced electric field of 108 V/m intensity and electric field gradient around Au nanowire to make strong positive DEP. Optical analysis confirmed the attachment of single QD on the nanowire. A single 25 nm diameter QD was manipulated on 100 nm, 200 nm and 400 nm width nanowires when 8 Vpp, 3 MHz sine wave was applied.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. Kim, S. Y. Lee, J.-K. F. Suh, J. H. Park, and H. J. Shin "Single quantum dot (QD) manipulation on nanowire using dielectrophoretic (DEP) force", Proc. SPIE 7927, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics IV, 79270V (14 February 2011); https://doi.org/10.1117/12.873504
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Nanowires

Dielectrophoresis

Gold

Electrodes

Silica

Single photon

Quantum dots

Back to Top