Development of photomask linewidth measurement and calibration using AFM and SEM in NMIJ

Kentaro Sugawara; Osamu Sato; Ichiko Misumi; Satoshi Gonda; Mingzi Lu

doi:10.1117/12.883851

1 June 2011 Development of photomask linewidth measurement and calibration using AFM and SEM in NMIJ

Kentaro Sugawara, Osamu Sato, Ichiko Misumi, Satoshi Gonda, Mingzi Lu

Proceedings Volume 8036, Scanning Microscopies 2011: Advanced Microscopy Technologies for Defense, Homeland Security, Forensic, Life, Environmental, and Industrial Sciences; 80360U (2011) https://doi.org/10.1117/12.883851
Event: SPIE Defense, Security, and Sensing, 2011, Orlando, Florida, United States

Abstract

We developed a measurement method for linewidth patterns of photomasks, and started a calibration service of the photomask linewidth measurement. For the photomask standards, high-quality of chromium film patterns, typical thickness of about 80 nm, sharp edges (edge angles more than 85 degree) and smooth side walls on a quart glass substrate were used. Two kinds of microscopes, an atomic force microscope (AFM) and a scanning electron microscope (SEM), were employed to calibrate the linewidth. At the first, the surface profile of line structures were inspected using the AFM, so that the distance between the left and the right side walls at the edge positions were geometrically-determined. Before the each measurement of photomask patterns by the AFM tips, each of the tip shape was checked using a needle artifact. Then AFM profiles of the photomask patterns were corrected using the tip shape data. The linewidth was calculated using the corrected profiles under a definition of the edge positions, a 10 % level from the top film surface. At the next, the linewidth bias between SEM and AFM were evaluated using the AFM data. Using this method, an uncertainty of the linewidth measurement was evaluated at 60 nm for a linewidth range of 0.5 μm-10 μm.

Citation Download Citation

Kentaro Sugawara, Osamu Sato, Ichiko Misumi, Satoshi Gonda, and Mingzi Lu "Development of photomask linewidth measurement and calibration using AFM and SEM in NMIJ", Proc. SPIE 8036, Scanning Microscopies 2011: Advanced Microscopy Technologies for Defense, Homeland Security, Forensic, Life, Environmental, and Industrial Sciences, 80360U (1 June 2011); https://doi.org/10.1117/12.883851

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
7 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Scanning electron microscopy

Photomasks

Calibration

Atomic force microscopy

Image processing

Chromium

Glasses

Show All Keywords

Keywords/Phrases

Search In:

Publication Years