Paper
8 November 2012 Simulation for spaceborne cloud profiling Doppler radar: EarthCARE/CPR
Hiroaki Horie, Nobuhiro Takahashi, Yuichi Ohno, Kenji Sato
Author Affiliations +
Abstract
The Cloud Profiling Radar (CPR) on EarthCARE satellite is the first spaceborne cloud profiling Doppler radar using Wband frequency in order to measure vertical velocity of clouds and rain. The EarthCARE/CPR has -35dBZ in sensitivity after 10km integration and less than 1 m/s in Doppler velocity measurement error. Because satellite velocity and beam width spread Doppler spectrum and coherency is low, the measurement error of Doppler velocity is increased. EarthCARE/CPR is the first Doppler radar, so we need to make simulation data for the algorithm development, but the simulation itself is difficult in order to take into account these effects. The current method is calculated 2-dimentional integration within illuminated area by antenna beam and hit by hit for all pulses, then it takes many computation times. We developed the new simple calculation method, which is calculated using integrated antenna pattern, then the computation time is decreased significantly. This paper is reported the comparison for, both methods.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hiroaki Horie, Nobuhiro Takahashi, Yuichi Ohno, and Kenji Sato "Simulation for spaceborne cloud profiling Doppler radar: EarthCARE/CPR", Proc. SPIE 8523, Remote Sensing of the Atmosphere, Clouds, and Precipitation IV, 852318 (8 November 2012); https://doi.org/10.1117/12.977253
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Doppler effect

Clouds

Velocity measurements

Radar

Antennas

Profiling

Satellites

RELATED CONTENT


Back to Top