Paper
30 November 2012 A new type fiber-optic accelerometer
Author Affiliations +
Abstract
A novel all-metal fiber-optic accelerometer with Michelson interferometric configuration is proposed, using mass blocks and flexible reed structure. The sensing arm is configured to directly transform the applied acceleration to fiber deformation in axial direction, which increases the acceleration sensitivity of the sensor. The axis of the reference arm is set orthogonal to that of the sensing arm in order to make it insensitive to applied acceleration, and thus decrease the phase noise of the sensor. Using the flexible reed of 1mm thick and the mass block of 208g, an acceleration sensitivity of 556.7rad/g(54.9dB) is achieved by this structure. In the case of 10-4 rad/rt Hz(100Hz)noise floor, the minimum detectable acceleration is 200ng/rt Hz.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chang Yang, Hongpu Zhou, Min Zhang, Shangran Xie, Fajie Duan, and Yanbiao Liao "A new type fiber-optic accelerometer", Proc. SPIE 8561, Advanced Sensor Systems and Applications V, 856113 (30 November 2012); https://doi.org/10.1117/12.999531
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Fiber optics

Fiber optics sensors

Fiber optics tests

Fiber Bragg gratings

Interferometry

Seismic sensors

Back to Top