Paper
1 April 2013 Fast 3D thick mask model for full-chip EUVL simulations
Peng Liu, Xiaobo Xie, Wei Liu, Keith Gronlund
Author Affiliations +
Abstract
Extreme ultraviolet lithography (EUVL) uses a 13.5nm exposure wavelength, all-reflective projection optics, and a reflective mask under an oblique illumination with a chief ray angle of about 6 degrees to print device patterns. This imaging configuration leads to many challenges related to 3D mask topography. In order to accurately predict and correct these problems, it is important to use a 3D mask model in full-chip EUVL applications such as optical proximity correction (OPC) and verifications. In this work, a fast approximate 3D mask model developed previously for full-chip deep ultraviolet (DUV) applications is extended and greatly enhanced for EUV applications and its accuracy is evaluated against a rigorous 3D mask model.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peng Liu, Xiaobo Xie, Wei Liu, and Keith Gronlund "Fast 3D thick mask model for full-chip EUVL simulations", Proc. SPIE 8679, Extreme Ultraviolet (EUV) Lithography IV, 86790W (1 April 2013); https://doi.org/10.1117/12.2010818
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications and 12 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

3D modeling

Extreme ultraviolet

Extreme ultraviolet lithography

Deep ultraviolet

Finite-difference time-domain method

Semiconducting wafers

RELATED CONTENT

Evaluation of methods to improve EUV OPC model accuracy
Proceedings of SPIE (April 01 2013)
EUV OPC for the 20-nm node and beyond
Proceedings of SPIE (March 23 2012)
Impact of an etched EUV mask black border on imaging...
Proceedings of SPIE (November 08 2012)
Rigorous simulation of defective EUV multilayer masks
Proceedings of SPIE (December 17 2003)

Back to Top