Paper
9 May 1988 Analysis Of A Used Pair Of Arcjet Electrodes
Thomas J Pivirotto, W D Deininger
Author Affiliations +
Proceedings Volume 0872, Propulsion; (1988) https://doi.org/10.1117/12.943765
Event: 1988 Los Angeles Symposium: O-E/LASE '88, 1988, Los Angeles, CA, United States
Abstract
The anode and cathode of a 30-kW class arcjet engine have been sectioned and analyzed. This arcjet was operated for a total time of 573 hours at power levels between 25 and 30 kW with ammonia at flow rates of 0.25 and 0.27 gm/s. The accumulated run time was sufficient to clearly establish erosion patterns and their causes. The type of electron emission from various parts of the cathode surface was made clear by Scanning Electron Microscope analysis. A Scanning Electron Microscope was used to study recrystallization on the hot anode surface. These electrodes were made of 2% thoriated tungsten and the surface thorium content and grad-ient perpendicular to the surfaces was determined by quantitative microprobe analysis. The results of this material analysis on the electrodes and recommendations for improving electrode operational life time are presented.
© (1988) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Thomas J Pivirotto and W D Deininger "Analysis Of A Used Pair Of Arcjet Electrodes", Proc. SPIE 0872, Propulsion, (9 May 1988); https://doi.org/10.1117/12.943765
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Tungsten

Boron

Electrodes

Molybdenum

Scanning electron microscopy

Thorium

Electron microscopes

Back to Top