Paper
11 September 2013 The experimental study of weak rough surface characteristic of laser scatter
Ji Cui, Huan Fu, Yun-sheng Qian, An-zhi He
Author Affiliations +
Proceedings Volume 8907, International Symposium on Photoelectronic Detection and Imaging 2013: Infrared Imaging and Applications; 89070L (2013) https://doi.org/10.1117/12.2031095
Event: ISPDI 2013 - Fifth International Symposium on Photoelectronic Detection and Imaging, 2013, Beijing, China
Abstract
In this paper, the research meaning and application of polarization characteristic of laser backscattering of the rough surface has been introduced. By designing experimental optical, using incident light of 632.8nm wavelength red light, the experimental study of light scattering characteristics of the existing roughness blocks and other typical rough target surfaces have been done. Analysis results show that scattered light intensity with the measured roughness of the target, the incident angle has a relationship. If the roughness of the measured target is changed, the corresponding scattering intensity and the degree of polarization will change. And if the materials of the measured targets are not the same, the backscatter intensity trends are not identical. The research of light scattering properties of typical rough targets has a positive significance to further study of the target feature.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ji Cui, Huan Fu, Yun-sheng Qian, and An-zhi He "The experimental study of weak rough surface characteristic of laser scatter", Proc. SPIE 8907, International Symposium on Photoelectronic Detection and Imaging 2013: Infrared Imaging and Applications, 89070L (11 September 2013); https://doi.org/10.1117/12.2031095
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light scattering

Scattering

Polarization

Laser scattering

Scatter measurement

Target detection

Optical testing

Back to Top