Paper
12 March 2014 High power fiber lasers in geothermal, oil and gas
Author Affiliations +
Abstract
The subject of this paper is the requirements, design, fabrication, and testing of a prototype laser rock drilling system capable of penetrating even the hardest rocks found deep in the earth. The Oil and Gas industry still uses many of the technologies that were in use at the turn of the 19th century. The drilling industry started with a great innovation with the introduction of the tri-cone bit by Howard Hughes in 1908. Since then, the industry has modified and optimized drilling systems with incremental advancement in the ability to penetrate hard crystalline rock structures. Most oil producing reservoirs are located in or below relatively soft rock formations, however, with the growing need for energy, oil companies are now attempting to drill through very hard surface rock and deep ocean formations with limited success. This paper will discuss the types of laser suitable for this application, the requirements for putting lasers in the field, the technology needed to support this laser application and the test results of components developed specifically by Foro Energy for the drilling application.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mark S. Zediker "High power fiber lasers in geothermal, oil and gas", Proc. SPIE 8961, Fiber Lasers XI: Technology, Systems, and Applications, 89610D (12 March 2014); https://doi.org/10.1117/12.2042339
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser drilling

Fiber lasers

Laser applications

Laser systems engineering

Laser development

Optical fibers

Carbon dioxide lasers

Back to Top