Fabrication of 3D surface structures using grayscale lithography

Christopher Stilson; Rajan Pal; Ronald A. Coutu Jr.

doi:10.1117/12.2037361

7 March 2014 Fabrication of 3D surface structures using grayscale lithography

Christopher Stilson, Rajan Pal, Ronald A. Coutu Jr.

Proceedings Volume 8973, Micromachining and Microfabrication Process Technology XIX; 89730E (2014) https://doi.org/10.1117/12.2037361
Event: SPIE MOEMS-MEMS, 2014, San Francisco, California, United States

Abstract

The ability to design and develop 3D microstructures is important for microelectromechanical systems (MEMS) fabrication. Previous techniques used to create 3D devices included tedious steps in direct writing and aligning patterns onto a substrate followed by multiple photolithography steps using expensive, customized equipment. Additionally, these techniques restricted batch processing and placed limits on achievable shapes. Gray-scale lithography enables the fabrication of a variety of shapes using a single photolithography step followed by reactive ion etching (RIE). Micromachining 3D silicon structures for MEMS can be accomplished using gray-scale lithography along with dry anisotropic etching. In this study, we investigated: using MATLAB for mask designs; feasibility of using 1 μm Heidelberg mask maker to direct write patterns onto photoresist; using RIE processing to etch patterns into a silicon substrate; and the ability to tailor etch selectivity for precise fabrication. To determine etch rates and to obtain desired etch selectivity, parameters such as gas mixture, gas flow, and electrode power were studied. This process successfully demonstrates the ability to use gray-scale lithography and RIE for use in the study of micro-contacts. These results were used to produce a known engineered non-planer surface for testing micro-contacts. Surface structures are between 5 μm and 20 μm wide with varying depths and slopes based on mask design and etch rate selectivity. The engineered surfaces will provide more insight into contact geometries and failure modes of fixed-fixed micro-contacts.

Citation Download Citation

Christopher Stilson, Rajan Pal, and Ronald A. Coutu Jr. "Fabrication of 3D surface structures using grayscale lithography", Proc. SPIE 8973, Micromachining and Microfabrication Process Technology XIX, 89730E (7 March 2014); https://doi.org/10.1117/12.2037361

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available