Facile fabrication of nanogap electrodes for suspended graphene characterization using direct ion beam patterning

Zhengqing John Qi; A. T. Charlie Johnson

doi:10.1117/12.2037853

7 March 2014 Facile fabrication of nanogap electrodes for suspended graphene characterization using direct ion beam patterning

Zhengqing John Qi, A. T. Charlie Johnson

Author Affiliations +

Proceedings Volume 8973, Micromachining and Microfabrication Process Technology XIX; 89730P (2014) https://doi.org/10.1117/12.2037853
Event: SPIE MOEMS-MEMS, 2014, San Francisco, California, United States

Abstract

Graphene is a two-dimensional sheet of carbon atoms with exceptional electronic and mechanical properties, giving it tremendous potential in nanoelectromechanical system devices. Here, we present a method to easily and reproducibly fabricate suspended graphene nanoribbons across nanogap electrodes of various separation lengths, demonstrating a technique with aggressive gap scalability and device geometry control. Fabrication is based on using a focused gallium ion beam to create a slit between joined electrodes prepatterened on a 100 nm thick silicon nitride membrane. The transparency of the nitride membrane provides reduced ion backscattering and adds milling resolution. Large-area monolayer graphene grown by atmospheric pressure chemical vapor deposition was transferred onto the silicon nitride chip and patterned into a free-standing ribbon geometry via electron beam lithography on organic ebeam resist followed by an O₂ plasma etch. We find that commonly used inorganic negative tone resist that requires a buffered oxide etch for resist removal will attack the adhesion layer (Cr₂O₃) between the electrode and nitride membrane, which is exposed immediately after milling, so an organic resist was selected to avoid this. Using this technique, we fabricate freestanding graphene devices contacted by electrodes of sub-100 nm separation length and preform a comparative study on the effects of current annealing on device resistance. The gap resolution of this technique is limited by the gallium ion beam, which allows for sub-100 nm gaps. Sub-10 nm gaps are feasible with He ion beams, proving direct applications in probing the high field transport properties of graphene nanoribbons at post-CMOS length scales.

Citation Download Citation

Zhengqing John Qi and A. T. Charlie Johnson "Facile fabrication of nanogap electrodes for suspended graphene characterization using direct ion beam patterning", Proc. SPIE 8973, Micromachining and Microfabrication Process Technology XIX, 89730P (7 March 2014); https://doi.org/10.1117/12.2037853

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available