Paper
10 March 2015 Electrical diagnositics of quantum cascade lasers
Peter G. Eliseev, Chi Yang, Tim C. Newell, Ron Kaspi
Author Affiliations +
Proceedings Volume 9382, Novel In-Plane Semiconductor Lasers XIV; 93821R (2015) https://doi.org/10.1117/12.2076663
Event: SPIE OPTO, 2015, San Francisco, California, United States
Abstract
The analysis of I-V and I-L curves in mid-IR quantum cascade lasers operating at room temperature is performed. When the ohmic component of the device resistance in the I-V curve is subtracted, the current I can be approximated by the exponential function, I = Is exp(eVj/ε) where Is is the saturation current, Vj is the n-n junction voltage, and ε is an energy parameter related to the tunneling mechanism which enables filling of upper states and emptying of lower states of the laser transition. Values of εare found to be in 0.68-1.45 eV range, and when divided by the number of stages in the cascade, the tunneling parameter of each stage is determined. The threshold related “kink” of differential I-V curves is shown. The effect of voltage saturation above the laser threshold is observed. Thus, the possibility of determination of the threshold using electrical measurements in quantum cascade lasers has been demonstrated.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peter G. Eliseev, Chi Yang, Tim C. Newell, and Ron Kaspi "Electrical diagnositics of quantum cascade lasers", Proc. SPIE 9382, Novel In-Plane Semiconductor Lasers XIV, 93821R (10 March 2015); https://doi.org/10.1117/12.2076663
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Quantum cascade lasers

Resistance

Diodes

Laser damage threshold

Semiconductor lasers

Continuous wave operation

Heterojunctions

RELATED CONTENT


Back to Top