Paper
21 May 2015 Optimal design of piezoelectric microtransducers for static response
D. Ruiz, A. Donoso, J. C. Bellido, M. Kucera, U. Schmid, J. L. Sánchez-Rojas
Author Affiliations +
Abstract
In this work, we present a systematic procedure to design piezoelectric transducers by simultaneously optimizing the host structure and the electrode layout. The technique allows maximizing any electromechanical coupling of output efficiency of the transducer. Either the output current collected at the electrodes when a mechanical force is applied (sensors), or the in-plane displacement when a given voltage is applied to the electrodes (actuators) can be optimized. We introduce a new idea to avoid the typical problem in topology optimization of the appearance of gray areas, getting finally 0-1 designs, some of which have been manufactured. Also, mathematical demonstration of reciprocity of the piezoelectric effect is shown. Many MEMS-based actuators like microgrippers, surface probes, or micro-optical devices can be optimized following this procedure. A similar approach has been demonstrated previously in modal sensors/actuators, although restricted to the design of the electrode layout for a given structure. The novel method shown here allows the simultaneous optimization of both shapes, for electrode and structure in the static case.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
D. Ruiz, A. Donoso, J. C. Bellido, M. Kucera, U. Schmid, and J. L. Sánchez-Rojas "Optimal design of piezoelectric microtransducers for static response", Proc. SPIE 9517, Smart Sensors, Actuators, and MEMS VII; and Cyber Physical Systems, 95171Y (21 May 2015); https://doi.org/10.1117/12.2180573
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Electrodes

Actuators

Computer aided design

Transducers

Manufacturing

Polarization

Back to Top